Welcome to the Transverter PI Demo. This evaluation version is designed to let you actually try Transverter PI with full functionality. A grid and a box of information are placed on rendered images in this demo version. That is the only difference.
Transverter PI consists of 4 plug-in components and the RipCore PostScript interpreter. To use Transverter PI, RipCore must be installed first.
Installing RipCore
Run the RipCore 1.0.8 Installer by double-clicking on it.
The standard installation will install a fat binary version of RipCore for 68K or PowerPC based Macintosh computers. The PowerPC version is optimized for the PowerPC 601 processor.
Custom installations are available for PowerPC 603 and 604 based Macintoshes in the actual shipping version.
RipCore is installed in the TechPool folder inside your System Folder.
After installation, you will need to rebuild your Desktop. The easiest way to do this is to restart your Macintosh, and hold down the Command and Option keys until you are presented with a dialog box asking if you want to rebuild the Desktop. You will only need to rebuild the Desktop for your startup drive (where RipCore is located.)
Installing the Components
After Installing RipCore, open the Transverter PI Components folder and drag the appropriate plug-in to the proper folder for the application you intend to use. The table below shows the normal placement for the most popular applications Transverter PI works with.
╩
If the application you are using is already running, you will need to Quit and restart the application to let the application find the component.
